Sprache

Kolbenstangen, Kolbenstangenzylinder, Verchromte Kolbenstangen

  • Chromstange, Chromstangenlieferanten, Chromschaft, Kolbenstange, Hartchromstange, s45c-Spezifikation, Chromstange, Hartchrom-Kolbenstange, hydraulisches Kolbenstangenmaterial, Hartchromwelle, c45e
Preisanfrage
  • Toleranz AD : f7 f8
  • Oberflächenrauigkeit : Ra max. 0,2 μm
  • Chromschichtstärke : <Φ22.225mm: min 15 μm
                                       ≧Φ24mm: min 20 μm
  • Härte:min : HV 850
  • Geradheit : <Φ20mm: max 0.25/1000mm
                        ≧Φ20mm: max 0.2/1000mm
  • Rundheit : 1/2 der Durchmessertoleranz
  • Standardlänge : 3 -bis 6 m
  • Standardgröße : Φ6 ~ 255Φ (Φ1/4” ~ Φ10”)
  • Korrosionsbeständigkeit : Φ<20mm R9 /72hr NSS
                                              Φ≧20mm R9 /120hr NSS
  • Werkstoff : JIS S45C,SAE1045,DIN CK45,EN C45E,ASTM1045, 20MnV6, 38MnVS6 geschliffen und maßhartverchromt
  • Preisanfrage
  • Produktinformation
  • Toleranzen
  • Produkt-Spezifikationen
Preisanfrage
AD(mm) Preisanfrage AD(mm) Preisanfrage AD(mm) Preisanfrage AD(mm) Preisanfrage
6 30 60 112
8 31.5 63 114.3
10 31.75 63.5 120
12 32 65 125
12.5 35 67 127
14 35.5 70 130
15 36 71 135
16 38 75 140
17 38.1 76.2 145
18 40 80 150
19 42 82.55 152.4
20 44.45 85 160
22 45 88.9 165.1
22.4 50 90 170
25 50.8 100 177.8
25.4 55 101.6 180
28 56 105 190
28.56 57.15 110 200
Preisanfrage
Wählen Sie alle Elemente
Produktinformation

Hydraulic Piston Rod, Precision Linear Shafts, Cylinder Chrome Rod, Hard Chrome Shaft, Hard Chrome Plated Rod, C45e Rod

Hydraulic piston rod, precision linear shafts, cylinder chrome rod, hard chrome shaft, hard chrome plated rod, C45E rod produced by our company come with more than JIS S45C material but aiso in SAE1045, DIN CK45, EN C45E, ASTM 1045, EN 19 , SCM440,42CrMo4, 4140, SUS 304, SUS316, SUS431, SUS410, SUJ-2, where the Hydraulic piston rod, precision linear shafts, cylinder chrome rod, hard chrome shaft, hard chrome plated rod, C45E rod first undergo precision milling and processing, and are then put through gard surface chromium treatment, allowing a surface precision level of f8, and a surface hardness reaching HV850 minimum and up, which not only help to improve wear resistance but also help to extend the life cycle of the rods, thus helping the customer save cost.

Purpose:
Hydraulic piston rod, precision linear shafts, cylinder chrome rod, hard chrome shaft, hard chrome plated rod, C45E rod for pneumatic and hydraulic cylinder.

 

Performance of Corrosion Resistance


Our hydraulic piston rod, precision linear shafts, cylinder chrome rod, hard chrome shaft, hard chrome plated rod, C45E rod will test corrosion resistance. The corrosion resistance is tested both in our own internal salt spray laboratory and Taiwan Metal Industries Research & Development Centre Regional R&D Service Department.

The testing period of hydraulic piston rod, precision linear shafts, cylinder chrome rod, hard chrome shaft, hard chrome plated rod, C45E rod reaches to 500 hours and is rated as 9.

Toleranzen

Tolerance Of Piston Rod

 Grade of tolerance
Dia mm Φ		 f g h
f7 f8 g6 h7 h8 h9
3mm -0.006
-0.016		 -0.006
-0.020		 -0.002
-0.008		 0
-0.010		 0
-0.014		 0
-0.025
3mm-6mm -0.010
-0.022		 -0.010
-0.028		 -0.004
-0.012		 0
-0.012		 0
-0.018		 0
-0.030
6mm-10mm -0.013
-0.028		 -0.013
-0.035		 -0.005
-0.014		 0
-0.015		 0
-0.022		 0
-0.036
10mm-18mm -0.016
-0.034		 -0.016
-0.043		 -0.006
-0.017		 0
-0.018		 0
-0.027		 0
-0.043
18mm-30mm -0.020
-0.041		 -0.020
-0.053		 -0.007
-0.020		 0
-0.021		 0
-0.033		 0
-0.052
30mm-50mm -0.025
-0.050		 -0.025
-0.064		 -0.009
-0.025		 0
-0.025		 0
-0.039		 0
-0.062
50mm-80mm -0.030
-0.060		 -0.030
-0.079		 -0.010
-0.029		 0
-0.030		 0
-0.046		 0
-0.074
80mm-120mm -0.036
-0.071		 -0.036
-0.090		 -0.012
-0.034		 0
-0.035		 0
-0.054		 0
-0.087
120mm-180mm -0.043
-0.083		 -0.043
-0.106		 -0.014
-0.039		 0
-0.040		 0
-0.063		 0
-0.100
180mm-250mm -0.050
-0.096		 -0.050
-0.122		 -0.015
-0.044		 0
-0.046		 0
-0.072		 0
-0.115
250mm-315mm -0.056
-0.108		 -0.056
-0.137		 -0.017
-0.049		 0
-0.052		 0
-0.081		 0
-0.130
315mm-400mm -0.062
-0.119		 -0.062
-0.151		 -0.018
-0.054		 0
-0.057		 0
-0.089		 0
-0.140
400mm-500mm -0.068
-0.131		 -0.068
-0.165		 -0.020
-0.060		 0
-0.063		 0
-0.097		 0
-0.155

(unit)µ=0.001mm

Produkt-Spezifikationen
Spec Chemical Analysis (%) Forging Temperature
JIS DIN C Si Mn P S ° C
S45C CK45 0.42-0.48 0.15-0.35 0.60-0.90 < 0.030 < 0.035 0.30-0.90
Slow Cooling

 

Induction Machine Function Application
Normalizing
°C		 Annealing
°C		 Quenching
°C		 Tempering
°C		 Yield Point
(Y.P)Kgf/
mm²		 Tensile Strength
(T.S)Kgf/
mm²		 Elongation
(EL)%		 twist
%		 Hardness
HB
820-870
Air Cooling		       >35 >58 >20 ---- 167-229 Bend Axle
810 Furnace Cooling    
---- 820-870 Water Cooling 550-650 Quenching ---- ---- ---- ---- 137-170  
---- ---- >50 >70 >17 >45 204-269 Axles

We are able to offer best chrome rods and chrome shaft for our customers. If you are interested in our hard chrome piston rod, chrome rod, welcome to contact us online. Related Keyword: Hydraulic Piston Rod, Cylinder Piston Rod